Adder-technology 2XPRO Manuel d'utilisateur télécharger pdf (Page 65)

SmartView XPro Installation and Use Page 64

The pinout for a “daisy chain” RS232 cable for more than 2 units is shown below:

5.2 Logging access activity (requires firmware v1.12 or above)

By connecting the SmartView’s serial port to a computer, a time stamped log of the

SmartView’s activity can be generated. This is useful for applications where it is

necessary to keep track of which users have accessed which computers. A simple

data logging program may be downloaded from the Adder Technology website

(XPLOG.EXE). This enables the activity log to be saved to a file or printed to a

printer. This logging program uses the Excel-compatible file XPRODATA.CSV (that

may be downloaded from the SmartView – see section 4.2) to cross reference the

port and user information to computer and user names in order to generate an

informative activity log.

To make use of the activity logging features:

1. Download the program XPLOG.EXE from the support section of the Adder

Technology website (www.adder.com).

2. Follow the instructions in section 4.2 to create the Excel compatible file

XPRODATA.CSV that contains a list of user and computer names and port

numbers.

3. Copy the XPRODATA.CSV file into the same directory as the XPLOG.EXE file.

4. Run the XPLOG file using the following command format:

XPLOG {activity_log_destination} {com_port}

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 77 78

Pas de commentaire

Adder-technology 2XPRO Manuel d'utilisateur Page 65