Adder-technology GEMAV4GEM Manuel d'utilisateur télécharger pdf (Page 20)

AdderView GEM Installation and Use Page 13

L1 - AdderView GEM locks on to active ports only during autoscanning (default)

L2 - AdderView GEM locks on to every port during autoscanning

L3 - AdderView GEM powers on in autoscan mode and locks on to active ports only

L4 - AdderView GEM powers on in autoscan mode and locks on to all ports

L5 – Allow the mouse to run at any speed (default)

L6 – Don't allow the mouse to run at very slow speeds

L7 - Cascade query code = AD (default)

L8 - Cascade query code = EF

T1 - 2 seconds autoscan delay time before switching to next port (default)

T2 - 5 seconds autoscan delay time before switching to next port

T3 - 7 seconds autoscan delay time before switching to next port

T4 - 10 seconds autoscan delay time before switching to next port

T5 - 15 seconds autoscan delay time before switching to next port

T6 - 20 seconds autoscan delay time before switching to next port

T7 - 30 seconds autoscan delay time before switching to next port

T8 - 60 seconds autoscan delay time before switching to next port

U1 - AdderView GEM channels are switchable using a 3 button mouse

or IntelliMouse (default)

(AdderView GEM reports 2 button mouse mode to PCs)

U2 - AdderView GEM channels are not switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports 2 button mouse mode to PCs)

U3 - AdderView GEM channels are not switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports 3 button mouse mode to PCs)

U4 - AdderView GEM channels are switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports IntelliMouse mode to PCs)

U5 - AdderView GEM channels are not switchable using 3 button mouse

or IntelliMouse

(AdderView GEM reports IntelliMouse mode to PCs)

U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button

mouse (default)

U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three

button mouse

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Pas de commentaire

Adder-technology GEMAV4GEM Manuel d'utilisateur Page 20