Adder-technology AdderLink iPEPS Manuel d'utilisateur télécharger pdf (Page 34)

 









If you need to enter a port number

Usually, when you make a network connection to the iPEPS (either using the

VNC viewer or a Web browser) you simply enter the IP address, i.e. 192.168.0.3.

However, if a special conﬁguration is necessary, then you may be asked to

specify a port number as well as the IP address.

What is a port?

To enter a port number in a Web browser

1 Enter the required IP address in the usual Address box,

i.e. http://192.168.0.3

2 At the end of the IP address, add a single colon and then enter the port

number (in this example, the required port number is 8000),

i.e. http://192.168.0.3:8000

3 Continue with the standard Web browser instructions.

To enter a port number in VNC viewer

1 Enter the required IP address in the usual ‘Server’ box,

i.e. http://192.168.0.3

2 At the end of the IP address, add two colons and then enter the port

number (in this example, the required port number is 11590),

i.e. http://192.168.0.3::11590

3 Continue with the standard VNC viewer instructions.

Downloading VNC viewer from the iPEPS

The iPEPS has the ability to distribute its own VNC viewer application.

To download the VNC viewer

1 Open your Web browser.

2 Enter the network address where the iPEPS is situated (in the form:

http://192.168.0.3) and make the link.

3 In the opening iPEPS screen, click the link that offers to download the secure

VNC viewer ‘from the unit’.

4 Save the download ﬁle (vncviewer.exe) to your system.

5 Select and run the downloaded ﬁle and then connect to the iPEPS using the

VNC viewer application.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 68 69

Pas de commentaire

Adder-technology AdderLink iPEPS Manuel d'utilisateur Page 34